Militec-1, Synthetic Metal Conditional, 1-Gallon Jug

Description

MILITEC-1® Dry, Impregnated Lubrication & Grease
MILITEC-1® is the Gold Standard in Combat.
Treated weapons have been tested and proven to be more accurate, deliver higher muzzle velocity with the same load, and show decreased wear at all critical wear points. Also, the weapons subjectively "feel" better in blind tests.
MILITEC-1 Synthetic Metal Conditioner has the unique ability to create a complex, molecular compound within the surface of heated gunmetal. This causes MILITEC-1 to become part of the metal, not merely a temporary coating or a boundary film. There are two main characteristics of this safe new compound. First, it seals and conditions the metal by stiffening (not hardening) the metal surface. Second, it makes the gunmetal self-lubricating under all environmental conditions.
After a complete application, a MILITEC-1 conditioned firearm is self-lubricating. Self-lubrication gives the firearm's gunmetal the dry lubricity that is required for sustained fire under all environmental conditions. If exposure to dust, sand, or extreme cold is a concern, all excess MILITEC-1 must be wiped away, leaving the firearm's surface metal clean, dry, and constantly lubricated. Please note: Complete corrosion protection and self-lubrication is attained only after both Step One and Step Two (below) are completed.
Instructions
Firearms Application:
PREPARATION: To take full advantage of MILITEC-1's unique properties, start with a clean firearm.
INITIAL TREATMENT: Applying MILITEC-1® to a firearm for the first time is a two-step process: (1) Application and (2) Firing.
All gasoline and propane powered engines
:
Add 8 ounces for a 4 to 6 quart/liter engine oil crankcase capacity every 15,000 miles (24,000 KM). Always change oil at the manufacturer’s recommended oil change intervals.
Diesel engines
:
For the first 15,000 miles (24,000 KM) add 2 ounces per quart/liter of engine oil crankcase capacity.
Thereafter,
add only 1 ounce per quart/liter every 15,000 miles (24,000 KM). Always change oil at the manufacturer’s recommended oil change intervals.
Racing engines, older engines or other engines operating in extreme conditions
:
Add 2 ounces MILITEC-1 per quart/liter engine oil every 7500 miles (12,000 km).
Transmission (manual or automatic)
:
Add 4 ounces every 30,000 miles (48,000 km).
Transfer case
:
Add 4 ounces every 30,000 miles (48,000 km).
Differentials
:
Add 2 ounces every 30,000 miles (48,000 km)
Power steering
:
Add 1 ounce every 30,000 miles (48,000 km).
Automotive air conditioning
:
Add ½ ounce when charging with refrigerant.
Cooling system (radiator)
:
Add 1 or 2 ounces to coolant. Aids heat transfer and lubricates water pump.
Wheel bearings
:
First, coat metal surface with MILITEC-1 before packing. Then pack with MILITEC-1 Grease or other quality grease blended with 10% to 15% MILITEC-1.
Motorcycle common sump pumps
:
Add 1 ounce per each quart/liter of oil in sump.
Two-cycle
:
Add 2 ounces per each quart/liter of two-cycle oil.