CANbus / J1939 Automotive Truck Output Module

Description

CAN / J1939 12VDC 6 Output MODULE
CAN / J1939 AUTOMOTIVE GRADE Module with  6  x 12VDC Outputs .
For use with J1939 2 Wire CAN systems
12V Power green LED
Data received yellow LED
2 x 10Amp outputs with short protection and green LED indicator
4 x 2.5Amp outputs with short protection and green LED
indicator
24V Jump-start protection
Load Dump Protected
-40 to +85 Deg Operation
28 inch color coded labelled harness with AMP 14 WAY locking sealed connector
4 Magnetic feet provide easy secure installation for a metal surface. No screws required.
Each LED / Relay can switch to a different CAN message stored in Firmware.  I will set the message to whatever you require before I send it.  Once I set the messages, you cannot change them.
Example:
Relay1 - SPN973 - Engine Retarder / Jake Brakes
Relay2 - SPN596 - Cruise Control Enable
Relay3 - SPN599 - Cruise Set Switch
Relay4 - SPN600
- Cruise Coast Switch
Relay5 - SPN601
- Cruise Resume Switch
Relay6 - SPN602 -
Cruise Acc Switch
( any combination of SPN's is possible including requested. Check - spn list xee - for example lists)